Household leaks can be a real pain to deal with. Not only are they unpleasant, but they can also lead to disastrous consequences if not dealt with immediately. If you have a garbage disposal that’s starting to leak, don’t panic—you can fix the issue with plumber’s putty. Here’s what you need to know.

What is Plumber's Putty?

Plumber's putty is a type of caulking that is used to patch up holes in pipes. It is made from a mixture of Portland cement, water, and sand. When you use plumber's putty, be sure to follow the instructions that come with it. You should also use a fiberglass cloth for extra protection when applying the putty.

How to use Plumber's Putty to fix a leak in a garbage disposal

If you are having trouble fixing a leak in your garbage disposal, try using Plumber's Putty. This putty is made of plastic and rubber and can be used to fix leaks from both the sink drain and the garbage disposal itself. First, make a small hole in the putty with a needle. Then, insert the needle into the leaky area and squeeze the putty around it until it forms a seal. Finally, heat up the plumbers putty set time  with a hair dryer until it becomes pliable. Use this sealant to fix leaks from your garbage disposal by pressing it around the edges of the breakage.

What to do if the putty doesn't fix the leak

If putty doesn't fix the leak, there are a few things you can do. You can try using a plunger to push the putty down into the crack and hold it in place with a bandanna or towel. If that doesn't work, you can try using an electric drill with a cone-shaped bit to break up the putty and create a channel for the water to escape. You can also try using a vacuum cleaner with the hose attachment to suck up any leaking material and seal the crack.

Tips for cleaning up after using Plumber's Putty

If your kitchen sink is constantly filling up with water and you can't seem to fix the leak, it may be time to call a plumber. One popular tool for fixing leaks and clogs in drains and garbage disposals is Plumber's putty. Here are some tips on how to clean up after using this product:

  1. Use a bucket to catch the water that flows out of the sink while you're working. This will help keep the area wet and reduce the chances of creating additional damage.
  2. Pour a small amount of baking soda down the drain, followed by hot water. Let the mixture sit for about two minutes before using a plunger to clear it out. Be careful not to hit any pipes or fixtures while clearing the clog!
  3. If all else fails, use Plumber's putty as instructed on the label. Be sure to wear gloves, safety goggles, and a mask if necessary in order to avoid breathing in any harmful fumes producible by this product.


If you're looking for a plumber's putty that can help fix a leak in your garbage disposal, this is the article for you. In this article, we will show you how to use plumber's putty to fix a leak in your garbage disposal and stop the flow of water. We will also provide some tips on how to use plumber's putty so that it doesn't cause any damage to your kitchen sink or appliances. Finally, we'll give you a link to our shop where you can buy plumber's putty in bulk. Thanks for reading!